TIE Businesscom PLUS 24, Руководство по установке и обслуживанию

Страница: 23 / 159

(c) If Internal Zone Paging is used, only those stations
granted assignment to that Paging group are allowed to
Conference.
(d) Only those stations programmed assignment to a Paging
group are permitted to join in a Meet-Me Conference,
regardless of the Paging feature used to initiate the
Conference.
(e) Program 49 (Excluded System Features) can disable this
feature.
(f) When Meet-Me Conference is initiated, the zone is made
unavailable to others in the system for a period of 30
seconds or until five stations enter the Conference.
Basic Programming:
Program Groups
Related Programming:
Program 49-Excluded System Features
Feature Interactions:
Paging, All Call
Paging, Internal Zone
CONFERENCE, MULTI-LINE
Description:
This feature permits internal parties to Conference with more
than one external party.
Conditions:
Six internal parties can Conference with two external
parties.
Stations programmed for Executive Override can enter
a Multi-Line Conference uninvited provided that the total
number of stations in the Conference does not exceed
six.
Basic Programming:
Program 30-Multi-Line Conference
Related Programming: None
Feature Interactions:
CO Lines
Executive Override (Barge In)
Intercom
CONFERENCE, UNSUPERVISED
Description:
This feature permits an internal party to establish a
Conference between external parties wherein the Conference
is maintained after the initiating party hangs up.
Conditions:
external parties can engage in Unsupervised
Conference.
Multi-Line Conference and Release of Abandoned Calls
on Hold must be programmed for Unsupervised
Conference to function.
The following station ports must be available, i.e., station
card installed, but unterminated:
System Port
2 4 18
3 6 2 2
6 4 3 4
Lines used for Unsupervised Conference must utilize
open loop disconnect supervision,
The Conference initiating party can reenter the
Conference.
A 600 OHM resistor must be connected across the
unsupervised station position. See Section 5, INSTALL
(Station Cabling and System Connections) for
more information.
Basic Programming:
Program &Unsupervised Conference
Program 30-Multi-Line Conference
Program 54-Release of Abandoned Calls on Hold
Related Programming: None
Feature Interactions:
CO Lines
Conference, Multi-Line
Release of Abandoned Calls On Hold