TIE DOWN ENGINEERING • Atlanta, GA 30336
www.tiedown.com (404) 344-0000
Assembly Instructions
Step 1
Axle Assembly (#4)
Rear Axle Frame
Carriage Bolt (#14)
Flat Washer (#13)
Nylock Nut (12)
Front Axle Frame
Cart Assembly (#1)
Axle Assembly (#4)
1/4” Bolt
(#9)
1/4” Nylock
(#9)
1/4” Washer
(#11)
Rear Axle Frame (#2)
Front Axle Frame (#3)
Slide the axle assemblies onto
the front/rear axle frames, the
axle brackets will be on the
outside of the axle frames.
Attach the axle to the frame
with 1/4” bolt, washer and nylock
nut.
Step 2
Lay the cart frame flat on
hard ground. Position
axle frames front and back
of the cart. The axle frames
will stand on their own.
Step 3
Lift the rear cart frame (may require two people).
Align the mounting holes with the axle and cart frame.
Insert carriage bolts threw cart frame and axle frame,
attach with washers and nylock nuts. Use a 15/16”
socket wrench to tighten the nuts/bolts.
Step 4
Lift the front cart frame (may require two people).
Align the center mounting hole with the axle
and cart frame.
Insert carriage bolt threw cart frame and axle frame,
attach with washer and nylock nut. Use a 15/16”
socket wrench to tighten the nut/bolt just enough
for the axle frame to turn freely (Do not over tighten).
Carriage Bolt (#18)
Flat Washer (#13)
Nylock Nut (12)
Page 3 of 4
1/4” Bolt
(#9)
1/4” Washer
(#11)
1/4” Washer
(#11)
1/4” Nylock
(#9)
1/4” Washer
(#11)