Lifan Engine Operation Check
Oil Filler Cap*
Oil Drain Plug
IMPORTANT!
PRIOR TO USE
FILL CRANK CASE WITH OIL.
Engine oil recommended: SAE10W-30.
As viscosity varies with regions and temperatures, select the
proper engine oil in accordance with the chart below.
Only the
gear reduction housing comes pre-oiled!
5W-30
Environment Temperature
-20˚
0
20˚ 40˚ 60˚
80˚ 100˚F
-30˚ -20˚ -10˚
0
10˚ 20˚
40˚C
SAE
10W-30
30
30˚
* NOTE: Engine Oil Alarm (Silent Engine Stall)
The engine oil alarm is designed to alert the user that the engine oil in the crankcase is insufficient.
Once the oil level in the crankcase is too low, the engine oil alarm will stall the engine automatically to make it
save from any damage.
Full Tank Capacity
3.6 Liters
NEVER MIX WITH OIL!
IMPORTANT:
The gear reduction housing is filled
and sealed at the factory and
should not need any maintainace.
Be carefull not to confuse the
oil filler cap with the gear reduction
housing fill cap. Read the complete
Lifan Owners Manual for information
regarding the gear reduction housing.
Gasoline:
Use gasoline with a Octane level over 86. Using unleaded gasoline will
decrease the possibility of producing carbon deposit and prolong the
engines service life. Never use a mixture of gas and oil! Make sure the
fuel is free of dirt and water.
