8
3) DTMF
Name
Setting
Description
DTMF ST
(DTMF side tone of
transmit code)
OFF:
No DTMF Side Tones are heard
Determines when DTMF side tones
can be heard from the transceiver
speaker
KB Side Tone: Side Tones are heard only
from manually keyed DTMF codes
ANI Side Tone
: Side Tones
are heard only from
automatically keyed DTMF
codes
KB ST+ANI ST
: All DTMF Side Tones are
heard
Save mode
OFF/Mode 1/Mode 2/Mode 3
Selects the ratio of sleep cycles to
awake
cycles
(Mode
1/Mode
2/Mode 3). The higher number the
longer the battery lasts. When
enabled, a word or two might be
missed when the frequency being
monitored becomes active.
Scan mode
TO:
Time Operation - scanning will
resume after a fixed time has passed
Scanning Resume Method
CO:
Carrier
Operation
-Scanning
Resume Method scanning will resume
after the signal disappears
SE:
Search Operation scanning will not
resume
PTT_ID
OFF
: No ID is sent
When to Send PTT-ID; Codes are
sent during either the beginning or
end of a transmission.
BOT
: The selected S-CODE is sent at
the beginning
EOT
: The selected S-CODE is sent at the
ending
BOTH
: The selected SCODE is sent at
the beginning and ending
PTT Delay
0-30ms
Signal code sending delay
KB_LOCK
If you select this option, the
keyboard is locked.
AutoLock(automatic
keypad lock)
When ON, the keypad will be
locked if not used in 8 seconds.
Pressing the [#╓O] key for 2
seconds will unlock the keypad.
BCL(busy
channel
Lock-out)
Check
: If the channel is occupied,
when you press the [PTT] key on
this channel, the radio will make a
beep tone and will not transmit any