Tico Pro-Spotter, Руководство по обслуживанию

Страница: 73 / 211

PRO-SPOTTER ENGINE
TICO Manufacturing
Service Manual 4-5
AIR FILTER
Removal
See Figures 4-6 and 4-7.
1. Park and prepare tractor for service. (See “Park
Tractor Safely” on page 1-3.)
Figure 4-6: Air Filter
2. Unfasten latches (1) and remove cover.
Figure 4-7: Air Filter Removal
3. Remove air filter (2).
4. Remove dust cap (3) and dispose of debris.
5. Repair or replace components as necessary.
Inspection
See Figure 4-8.
Figure 4-8: Filter Gauge
• Replace air filter when yellow indicator on the filter
gauge (4) reaches red line.
• Check filter for wear or damage. Replace parts found
to be unserviceable.
• Clean all parts of dirt and debris.
Installation
Installation is reverse of the removal procedure.
NOTE
Filter gauge should be reset when a new filter is installed.
• Install new filter if necessary and reset filter gauge.
1 Latch (4 used)
2 Air Filter 3 Dust Cap
TPS-039
1
1
3
TPS-040
2
4 Filter Gauge 5 Blower-to-Hump Hose Tube
5
TPS-047
4