TiCad GOLDFINGER, Прочтите меня первым

Страница: 3 / 8

3
Frame connections (firm-fix connection):
Next, connect the centre bar to the motor bar.
Removing and attaching
the drive wheels
Removing and attaching
the front wheel
Attaching the wheels:
The drive wheels can be attached and removed with a quick
release fastener by pushing the sliding sleeve at the wheel hub
(see arrow). Make sure the drive wheels are locked to the drive
pins appropriately.
Always make sure that no dirt gets into the hub. The hubs
must not be oiled or greased.
The front wheel can be fitted and removed by pulling back the
knurled sleeve (see arrow). When attaching the wheels, slightly
turning the sleeve can make it easier for the wheels to engage.
Expansion bolt turned in too far
Bag holder Expansion bolt in the correct position
Connecting/removing the battery:
Insert the battery into the provided battery holder and fasten it
with the strap. Connect the battery before placing the golf bag
onto the trolley. Do not let the battery connector drop onto the
ground. To remove the battery, press down the catch and pull the
connector out horizontally
(do not pull on the cable) .
1 Battery inside plastic housing
2 Cable
3 Connector, 4-pin, with catch
Bag holder:
Both bag holders are attached to the trolley with expansion bolts.
The expansion bolts must not be turned in too far (see images),
because there has to be a gap between the expansion bolts and
the start of the threads. To fit the bag holder, insert it into the frame
and then align and fix it into place by twisting the bag holder.
2
3
1