TIC B503, Инструкция по эксплуатации, Страница: 4 / 6

Multi-Speaker
Broadcast Mode
With broadcast mode, you can connect up to 100 compatible TIC Bluetooth 5 speakers/devices together to create a no-
hassle multi-speaker sound system. In broadcast mode, one speaker will serve as the main transmitting device and all
other speakers will serve as secondary receiving devices. The broadcast range is up to 300 feet in outdoor setting with
clear line of sight. To optimize broadcast range in your multi-speaker sound system, we suggest choosing the most
centralized speaker as the main transmitter device. In addition, elevating any device a few feet off ground level can
maximize the broadcast transmitting/receiving range.
To set up
broadcast mode
1. Select the appropriate speaker as the main speaker. While not required, we recommend pairing the Bluetooth
device first before setting up the broadcast mode. Press the Transmitter Mode
(TX)
button. You should hear the
voice prompt Transmitter Mode.
2. On a secondary speaker, press the Receiver Mode
(RX)
button. You should hear the voice prompt “Receiver Mode”.
If a speaker is already connected to a Bluetooth device (as indicated by a solid blue light), you will need to disconnect
it first or the broadcast connection would not work in step 3.
3. Within 30 seconds, double-click TX button on the main unit and double-click RX button on the secondary unit. You
should hear the voice prompt “searching” from both units. You will hear the voice prompt “connected” once the
connection is completed.
4. If the connection is not made within 30 seconds, you may repeat step 1-3.
5. To add any additional secondary speaker, repeat step 2 and 3. Up to 100 devices can be added together.
5
To
exit broadcast
mode
Press the Reset (or Bluetooth) button once to exit broadcast mode. If pressed on the main unit, it will stop the main
speaker from broadcasting to all secondary speakers. If pressed on a secondary speaker, this specific secondary
speaker will stop receiving
and
be
allowed to
connect
to and play from a
separately paired
Bluetooth
device.
To
restart/rejoin
broadcast mode
For the main unit, press TX button to restart broadcast mode. You should hear the voice prompt “transmitter mode”.
Broadcast mode will then resume shortly for all speakers (assuming secondary speakers are still in receiver mode).
For any secondary unit, first disconnect any connected Bluetooth device by double-clicking the Bluetooth (BT) button.
Press the RX button to resume receiving from the previously connected main speaker. You should hear the voice prompt
“receiver mode” and broadcast mode will resume shortly.
To
switch main speaker
Exit broadcast mode for each speaker and redo the broadcast mode set up instructed in the previous page. Please
remember
to
disconnect the
Bluetooth
device from the original
main
speaker before switching it
to
receiver
mode.
6