Tibo Urban 500, Руководство пользователя, Страница: 8 / 12

8
Turn it back on
31. USB MIDI
Plug in the USB cable into the USB MIDI port on the rear panel.Plug the other end of the USB cable into any
available USB port on your computer.It will enable you to use the unit in MIDI function.
32. INPUT
Plug in the line level device such as tape deck or additional CD player here.
33. Bluetooth status LED
This LED indicates the connection status of Bluetooth.
When LED turned solid ON, it means Bluetooth is connected.
34. Bluetooth Sync button
Press this button according to below instructions for different operation:
Short press 1 sec: Turn on Bluetooth and old paired device can be connected to unit, or unit will search for
new Bluetooth activated device for pairing.
Press/Hold 5 sec: Turn on Bluetooth and unit will enter “Pairing Mode”, new device can be connect to unit.
Press/Hold 10 sec: Turn off Bluetooth and all connection will be lost.
Note: Bluetooth connection is for playback only. Mixing features is not possible to use in this mode.
IN PU T MI DI
LI NE 1 LI NE 2 US B
L
R
BT
BT S YN C
3
4
5
6
7
8
9
2
10
11
12
31
32
33
34
MIXING Console Function
1. INPUT TOGGLE SWITCH
Selects which source will be live to that channel based on what
you have connected to the rear panel input section. For example
on CHANNEL(1) the switches allows you to choose between
USB 1 and PHONE 1/LINE 1 and MIDI mode and also on
CHANNEL(2) the switches will let you choose between USB and
PHONO 2/LINE 2 and MIDI mode.
2. LED METER
Indicates the master output level.
3. MASTER LEVEL
Adjusts master level output signal.
4. CH1&CH2 GAIN CONTROL
Adjusts CH1&CH2 level.
5. HIGH FADER 1-2
Adjust CH1&CH2 equalization of high frequencies.
6. MID FADER 1-2
Adjust CH1&CH2 equalization of mid frequencies.
7. LOW FADER 1-2
Adjust CH1&CH2 equalization of low frequencies.
8. BOOTH VOLUME
level control for the output boot.
9. CUE/MIX/PGM CONTROL
Counter clockwise you will be able to monitor the assigned cue
signal.Slowly turning the control clockwise to the assigned cue
signal.Slowly turning the contrlo clockwise to middle position
allows you to monitor CUE MIX with PGM.Moving the control
clockwise to the right allows you to monitor moving the control
clockwise to the right allows you to nonitor PGM output.
10. CUE FOR CH1-2
Selects which source will be live to that channel for
CH1 & CH2.
11. INPUT FADER
Controls individual source levels for CH1-2 in the mix.
12. CROSSFADER
Slide the CROSSFADER towards a deck to cause that deck’s
track to be heard in the mix. This is an important DJ tool for
blending the tracks together, moving from one track to the next,
and creating a good overall mix.