Tianjin Key-Disp KD68C, Руководство пользователя

Страница: 15 / 18

12
interface. Press UP or DOWN button to select Disable or Enable and
press MODE button to confirm. Power-on Password default is Enable. If
you choose Enable, press MODE button to enter Power-on Password
Modify interface, otherwise exit the power-on password settings
interface.
Power-on Password Disable/Enable Interface
Power-on Password Modify
When the display shows “Password Set, P3”, press
UP
/
DOWN
to
modify the value and then press MODE to confirm digit one by one until
the new 4-digit password is completed.
To store the new power-on password, hold MODE button for 2 s
and then exit settings.
When switching the eBike system on next time, the display will
show P1,0000, please input the new password to power on.
Power-on Password Modify Interface
◆
Exit settings
In the settings state, press
MODE
button to confirm the input. Hold
MODE
button more than 2 seconds to save the settings and then exit the
current settings. Hold
DOWN
button more than 2 seconds to cancel the
operating but not saving the settings data, and then exit the settings state.
■If there is not any operations in one minute, display will exit the
settings state automatically.