2
order to avoid danger and property damage, in installation and operation before your
purchased equipment and any related installation, operation and maintenance personnel
must first read this manual carefully and save it for future reference.
●
In the use of this product is installed, you must strictly comply with the electrical
safety practice for countries and regions
●
IR Dome Camera AC/DC24V-powered, high-speed ball with AC24V power supply, be
sure to confirm before the strike on power supply fault power supply will cause the
machine to malfunction. Please use this machine comes with a dedicated power
supply. Please confirm that the AC supply voltage before you power up the device
properly
●
Please do not send more than one machine connected to the same power supply (can
cause excessive heat or fire)
●
Avoid installing the device in direct sunlight, poor access, or near any heat sources
such as heaters and heating (can cause excessive heat or fire)
●
When you have completed the wiring, disassembly and assembly operations, such as
unplugging the power supply not charging plug. Has not completed all the installation
work, do not power on
●
When you are installing the product, ensure the product is firmly seated (caused by
installing loose responsibility, our company is not responsible)
●
Ball machine products, such as smoke, fire, noise, immediately pulling out the power
cord and contact your dealer
●
In order to prevent an explosion or fire, prohibited in the case of flammable and
explosive gas using this product
●
During lightning weather installation or commissioning test of this device is strictly
prohibited. In thunderstorm area, use the lightning rod, lightning arrester, equipment,
protect the equipment against lightning strikes
●
If the device fails, do not attempt to disassemble or modify the device. Maintenance
work must be carried out by our authorized service personnel.
(Problems caused by unauthorized repair, our company is not responsible)
Attentions