Tiandy TC-D2410-AW, Руководство пользователя

Страница: 38 / 43

38
Routine maintenance
Speed dome camera are compact equipment, often on their
maintenance is also necessary to avoid the question of further
expansion.
（
1
）
Often clean the cover. At present the speed dome camera do not
have self-cleaning ability so it is necessary to periodically and
manually clean the cover.
（
2
）
Speed dome camera overheating, there is abnormal noises.
Confirmation are the speed dome camera at their own problems, it
should be immediately unloaded In order to avoid the speed dome
camera inside the important components such as camera further
damage.
（
3
）
Unless the user's special needs, it is recommended for everyday
use in the course of the speed dome camera not to always be in
high-speed automated inspection status, gear and belt to run
non-stop wear and tear, will be too fast to reduce preset point
positioning accuracy and shorten the life of the speed dome
camera.
（
4
）
When return the bad speed dome camera to the factory. It is
suggested that tell the factory the working environment, a failure
report to the situation before and after, the manufacturers of the
technical staff will be careful analysis of the failure was accidental
or there is the law and find the best solution. This works for
manufacturers and traders, are very useful.