TCSG5270 Sounder Strobe User Manual
Ver 1.0 2022.03
Liaoning
·
Yingkou Tiancheng Fire Protection Equipment Co., Ltd
5
and read.
First go through the main "operation menu" of the encoder and press the No. 2 key to select "(2) mode setting",
enter the sub-menu and select "(1) TC5000", you can also press "(5), (6), (7)" to choose incremental, normal, or
degressive coding, which is convenient to use (Note: the default is TC5000, normal code). After selecting, you can
press the "clear key/page key" to directly enter the addressing interface, or press the "exit key" back to the main
operation menu, press the No. 1 key to select "(1) Read and write address", then connect the encoder to the bus
terminals 1, 3 of the sounder strobe, and enter the address code (1-255) under standby state , press the "write
address" key, if encoding succeeds, it displays "successful", otherwise displays "failed".
8. Application
The signal bus of the sounder strobe is connected to the loop bus of the control panel. If it is necessary to start
the sounder strobe, the fire alarm controller can directly start it or start through a linkage programming.
9.Documents and Maintenance Manual
9.1. Packing documents: 1) Packing list: 1; 2) User manual: 1
9.2. Warranty: Our company is responsible for the maintenance of this product. If you find any problems, please
contact our company's technical service department in time. Users are not allowed to disassemble or repair it by
themselves, otherwise the consequences are at their own risk.
9.3. The contact information for maintenance is as follows:
China·Liaoning·Yingkou Tiancheng Fire Protection Equipment Co., Ltd
Add: No.11-2 Kechechang Xili, Xishi District, Yingkou, Pilot Free Trade Zone (Liaoning), China
Tel: 86-417-3553119
Post Code: 115004
E-mail: [email protected]
Website: www.tcfiretech.com
