ThyssenKrupp gulliver, Руководство пользователя

Страница: 13 / 24

04/03/2015 Orion - Gulliver User Manual
13
4.2. Machines with manual doors or with “EVO” motorised door openers
4.2.1. How to call he Platform Lift from the floors
If the green light is on, the Platform Lift has arrived at the floor.
If the red signal is on, the car is in movement. The Platform Lift can be called once the red light
turns off. The call is performed pushing just once, and without having to hold the button down, the
button on the floor button panel, the red signal light lights up indicating that the machine is in
movement.
When the lift arrives at a floor, the door will automatically unlock and open. After a pre-set amount
of time (default 13 seconds), the door will close again.
If the Platform Lift is already at the destination floor, the door can be opened by pressing the floor
button on the panel or by pulling slightly on the door. The door will automatically open after one of
these actions has been performed.
4.2.2. How to operate the Platform Lift from the cabin
The commands are only active while all of the doors are closed and locked.
If the door is open, wait for the door to close automatically (default after 13 seconds).
In order to move the Platform Lift towards the destination floor, press and hold down the relative
button.
Only after reaching the floor may the button be released, then the door unlocks and it is possible to
exit the platform.
4.2.3. Obstacles during door movement
If the door encounters an obstacle while opening, it automatically stops and re-closes itself after a
set delay time.
If the door encounters an obstacle while closing, it stops and re-opens itself automatically.
ATTENTION! The subsequent door manoeuvre, after encountering an obstacle, will be
performed at low speed.