2
S A F E T Y I N S T R U C T I O N S
Warning:
To reduce
the risk of fire or
electric shock, do
not expose this appliance to rain or moisture.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated ”dangerous
voltage“ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Read Instructions:
All the safety and operating
instructions should be read before the appliance is
operated.
Retain Instructions:
The safety and operating instruc-
tions should be retained for future reference.
Heed Warnings:
All warnings on the appliance and in
the operating instructions should be adhered to.
Follow Instructions:
All operation and other instruc-
tions should be followed.
Water and Moisture:
The appliance should not be used
near water—for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
Carts and Stands:
The appliance should be used only
with a cart or stand that is recommended by the
manufacturer.
Wall or Ceiling Mounting:
The appliance should not be
mounted to a wall or ceiling.
Ventilation:
The appliance should be situated so that its
location or position does not interfere with its proper
functioning. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
obstruct the heat sink surfaces; or placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air near the heat sink surfaces.
Heat:
The appliance should be situated away from heat
sources, such as radiators, stoves, or other appliances
that produce heat.
Power Sources:
The appliance should be connected to a
power supply only of the type described in the operation
instructions or as marked on the appliance.
Power Cord Protection:
Supplies should be routed so
that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular
attention to cords and plugs, convenience receptacles,
and the point where they exit from the appliance.
Cleaning:
The appliance should only be cleaned as
recommended by the manufacturer.
Non-Use Periods:
The power supply cord should be
unplugged from the outlet when left unused for long
periods of time.
Object and Liquid Entry:
Care should be taken so that
objects do not fall into and liquids are not spilled into
the inside of the appliance.
Damage Requiring Service:
The appliance should be
serviced if any of the following events occur:
The power supply or plug has been damaged.
Objects have fallen, or liquid has been spilled into the
appliance.
The appliance has been exposed to rain.
The appliance does not appear to operate normally or
exhibits a marked change in performance.
The appliance has been dropped, or the enclosure is
damaged.
Servicing:
The user should not attempt to service the
appliance beyond what is described in the operating
instructions. For all other servicing, consult your dealer
or contact Snell Acoustics.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
11
Bass Level Control
The Bass Level control adjusts the volume of the ICS Sub 24 output. The Level Control should be adjusted to achieve a
good main speaker-to-subwoofer balance. However there is significant interaction between the Crossover control and
the Bass Level control. This interaction affects the sound in the midbass range where the transition from the main
speakers to the subwoofer occurs. If you are hearing too much midbass, adjust the crossover frequency down while
increasing the bass level. This decreases midbass output while increasing the amount of lower bass energy. Conversely,
turning down the bass level while slightly increasing the crossover frequency will increase the ratio of mid bass-to-low
bass sound. The result will be a sound with a ”quick“ quality. Experiment while listening to a variety of sources. Adjust
the ICS Sub 24 Crossover and Bass Level controls until you achieve a smooth and seamless blend with the main
speakers .
Setting the Phase
The proper setting for the Phase Switch changes based upon the location of the speaker. To determine the correct
setting for your room, use a source with a full and continuous bass line. Have a second person repeatedly switch the
Phase Switch from one position to the other. You will notice that one position will deliver stronger midbass sound. This
is the proper position for the Phase Switch. If the midbass now seems too prominent, compensate by slightly lowering
the crossover frequency or the output level.
How To Care For Your Speakers
➤
Use a soft terry cloth towel slightly dampened with water, glass cleaner, or a diluted mild detergent. The towel
should be just damp enough to wipe the surface clean without leaving a trail of moisture.
➤
Do not use abrasive cleaners or any cleaner containing chemicals harsher than those found in glass cleaner.
