2
Complete Checks In Section
Before Loading The Machine
If any of the following tests result in failure, consult the service book
for instructions for hand brake adjustment.
1
Start engine.
2
With the handbrake applied, engage first gear and release clutch
slowly, with engine revs at tick-over; the machine should move
forward.
3
Release throttle and apply clutch and footbrake.
4
With the handbrake applied, engage second gear and release
clutch slowly, with full engine revs; the machine should stall.
5
If the machine moves forward, release throttle and apply clutch
and footbrake.
6
Select Neutral
7
Switch engine off.
Alternatively the handbrake can be checked by measuring the load
required to apply the handbrake. The required force for applying the
handbrake is a 12 kg pull (+/- 0.5 kg), measured from the end of the
grip handle.
How to test the hand brake
WARNING
• Before testing handbrake, ensure that the machine is on firm,
level ground and that the area is clear of people.
• Do not operate a machine that has failed the handbrake test.
• The handbrake must not be over-tightened, as this may cause
damage to the axle.