9
8. Nuts, Part No. SPAC-M90-10008, are M5 nut used for the u-bolts, SPAC-M01616,
refer to Figure 3. Nuts are to be tightened to 5Nm. Remember to use the washers
M90-10128 as shown in Figure 3.
9. Screw, M4*22, Part No. SPAC-M90-10068, is used to secure the plug.
10. Nuts, Part No. SPAC-M90-10168, are M6 nut used for the u-bolts, SPAC-M01619,
refer to Figure 3. Nuts are to be tightened to 8Nm. Remember to use the washers
M90-10062 as shown in Figure 3.
11. Screws, Part No. SPAC-M90-10205, are M6 (metric) 40mm long screws made of
stainless steel (A4) used for fastening the antenna to the flange on the Mounting
Pole so that the installation will endure vibrations and heavy loads due to wind or
surges from rough sea. Remember to use the washers M90-10062 as shown in
Figure 3. DO NOT CHANGE THE LENGTH OF THE SCREWS.
