402.435.4249 www.THUNDERSTONEMFG.com Page 5
Programming Remote to work with the Remote Lift Axle System
1.
Locate the remote lift axle relay enclosure in the nose of
the trailer.
2.
Open the enclosure and locate the remote programming
button on the bottom side of the relay module.
3.
Open the remote flip lid and observe the buttons
illuminate indicating the remote is active.
4.
Press and hold the program button on the relay module
for 5 seconds until you hear an audible “beep” indicating
it is ready to accept programming.
5.
On the remote, press the “AXLE UP” button five times.
With each press of the remote you should hear and audible “beep”
from the relay module. After the fifth press, the relay will beep
twice confirming programming.
Operating Remote with the Remote Lift Axle System
Open the remote flip lid and observe the buttons illuminate
indicating the remote is active.
Press and release the “AXLE UP” button to raise the tag axle of the
trailer.
Press and release the “AXLE DOWN” button to lower the tag axle
of the trailer.
If “AXLE UP” & “AXLE DOWN” buttons have reverse operation,
locate the 2 weatherpack connectors outside of the lift axle control
box on the side of the trailer. Unplug, then reverse and replug the
connectors together.
Program
Button
RELAY MODULE
AXLE
UP
Button
AXLE
DOWN
Button
REMOTE
