Thunderfunk Bass Amplifiers, Руководство пользователя, Страница: 12 / 22

12 | Thunderfunk Bass Amplifiers Users Manual
Recording Outputs
The back panel gives all the connectivity one could ask for. Use it as a fully integrated amplifier,
as a DI, as a preamp, as a Power Amplifier. Use the features stand-alone, or combined. (Note: The
voltage selector switches are under the cover plate, above the AC power connector)
Direct Instrument Balanced Output
This DI Output is a balanced XLR connector, a buffered but otherwise exact replica of the instru -
ment input except at line level. This can be routed to another amplifier or a mixing console for
pure instrument tone unadulterated by any front panel settings. This can also be routed to a
tuner.
Post EQ and Limiter Balanced Output
This is a balanced XLR output jack, with a variable output adjusted by the Record Level control.
The branch for this is AFTER the Gain/Limiter, Effects Loop 1, all the EQ controls, the Enhancer,
and the Timbre controls, but before the front panel Volume (next to the power switch), the Effects
Loop 2, and the Power Amp. Signals from this XLR are therefore fully controlled and tone shaped
by the preamp; it can be routed to a mixing console, direct to the PA or direct to another Power
Amp/Speaker System. Pin 2 is the + signal. You can also use this DI Output and a special XLR to
Phone jack cable to daisy chain several Thunderfunk slave amps together, matching the setup
with one set of preamp controls working all the power amp and speaker systems simultaneously.
See your dealer for more information on possible setups.
Recording Level
This controls the line level strength being sent from the XLR balanced output jack. You can also
use this DI Output and a special XLR to Phone jack cable to daisy chain several Thunderfunk slave
amps together, matching the setup with one set of preamp controls working all the power amp
and speaker systems simultaneously. See your dealer for more information on possible setups.