Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Let’s Get Started
Follow the steps below to boot up your device.
1.
Take out
Interposer Board, Senser Board, and Main Board carefully
from the package.
2.
Connect the Interposer Board to the Main Board.
3.
Connect the Senser Board and Audio Board to the Main Board.
4.
Set the DIP switches on the Main board as follows:
SW2200: 2, 4 - ON
SW2100: 3, 4 - ON
SW2101: 3~6 - ON
SW1301: 5, 6 - ON
SW1300: 1~6 - OFF
5.
Connect the power adapter to the board assembly via
12V DC in jack
(connector 29).
6.
Connect the board assembly to a computer via
Type-C USB port
(connector 25) if
adb
tool is needed.
Micro USB port (for UART debug)
(connector 28) if debug function
is needed.
7.
Press
Power on button
(connector 1) to boot up the device.
