Page 6
For technical questions, please call 1-888-866-5797.
Item 63585
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Assembly
1. Place two panels side-by-side on a flat surface.
Do not drop the panels or allow
anyone to lean or step on them.
2. Insert Screws (6) into the innermost mounting
holes of first two solar panels. See Figure A.
Screw (6)
Mounting Holes
Figure A
3. Use Wing Nuts (9) to fasten the
Connection Brace (7) onto the top back
ends of solar panels. See Figure B.
Wing Nut (9)
connection
Brace (7)
Figure B
4. Repeat for the bottom ends of panels.
Insert Screws into mounting holes along the
bottom end and fasten Connection Brace onto
the back using Wing Nuts. See Figure C.
Screws
Figure c
5. Repeat Steps 1-4 for the other two
solar panels. See Figure D.
Figure D
6. The Mounting Stands on each panel come
pre-assembled. After panel assembly, stand
panels upright and pull each Mounting Stand
out to locked position. See Figure E.
Locked position
Figure E
