Page 3
For technical questions, please call 1-888-866-5797.
Item 64102
Charging Instructions
IMPORTANT:
Battery condition
and charge amperage must
be monitored while charging
to prevent battery damage.
WARNING! Only use a charger
designed for this specific type of
battery: Sealed 12V, 35Ah, AGM,
Lead-acid battery.
Other chargers may damage
the battery and lead to fire
and other hazards.
Note:
This Battery is factory charged.
That initial charge should
last about 3 months.
1. If the Battery is less than 3 months
old, give it a supplementary
charge before first use.
Be careful not to
overcharge the battery.
2. If the Battery is more than
3 months old, charge it
fully before first use.
3. Stop charging when the amperage
remains stable for 3 hours.
4. If the Battery is going to be stored,
attach it to an automatic float
charger designed for this battery
type and capacity:
Sealed 12V, 35Ah, AGM,
Lead-acid battery.
Connection Instructions
CAUTION! To prevent injury and burns from short circuit,
remove watches and jewelry before connection.
1. Use Nuts and Bolts to
attach cables to Terminals,
and tighten securely.
2.
Avoid Battery damage –
DO NOT OVERTIGHTEN.
