−
Mount the bracket (C) to the voltage regulator. Make sure the bracket is the next part towards the
engine. Use the new Allen screws here.
−
Loose the engine bolt (A) and mount the bracket (C) with it also. Replace the OEM bearings with
the new 17mm parts.
−
Install the chin fairing (D) for test purposes to the bracket. If the fairings position is too near or too
far to frame you can rasp the holes (E) to slots until the position is right.
−
If everything fits perfect you can paint the chin fairing.
−
Stick the cellular tape (F) for paint protection inside the chin fairing and install the fairing finally.
−
Stick the label onto a visible position to fairing.
−
Install the right footrest unit again.
−
Just a reminder to check once again all nuts and bolts are secure!
The Thunderbike team would like you to be careful when riding with your new chin fairing. We wish
you both safety and fun.
