PACKING LIST:
Amount
Item
1
Upper triple tree
1
Steering stem cover
1
Lower triple tree
1
Steering stem incl. center horn
1
Hex screw M14x30mm
1
Nut for steering head bearing
2
Steering head bearing
INSTALLATION INSTRUCTIONS:
DISASSEMBLY OF ORIGINAL FRONT END:
Lift the front end so front wheel is off of the ground. Make sure the motorcycle is
secure and there is no danger of it falling or rolling!
Remove front wheel, fender and brake calipers.
Remove headlight, blinkers and blinker holder.
Remove handlebars and risers.
Loosen the fork tube clamps on upper and lower trees and remove both fork tubes.
Remove the original triple trees and covers.
Remove the steering head bearings and install the new included bearings.
Make sure the bearing tracks are completely seated in in the steering head.
