background image

03

ADJUSTMENT STEPS

When the servo arm is at the natural 

position under power on, please adjust the 

horiztontal tail leverly as shown in the 

picture.

SAFETY PRECAUTIONS

1. If you have the simulator, we suggest that you can practice your skill by the simulator before you fly this model, which 

will bring some help for you.

2. Please climb the plane above the 50 meters with half throttle to fly it when you fly it for your first time, then you will 

be familiar with the performance of this plane.

3. You should learn how to control this model blandly, it will reduce the possibility of crash and prolong the usage life 

of the plane.

4. The turn radius should not be too little, or it will stall and it will increase the possibility of crash.

5. When taking off or landing the plane, you should against the wind.

6. Do not fly the model over your head or behind you, you should fly the model in front of you.

CONFIRMATION OF CG LOCATION

Check the center of gravity and make sure the CG of 

this plane should be within the range 50-60mm away 

from the leading adge of the main wings as indicated 

in the picture.

50-60mm

Содержание 4385-F00










Отзывы: