USERS MANUAL NOVA SERIES
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
33
33
15. LED lamp
It’s used for lighting the working table once turn the Main switch on.
16. PC connection port(USB)
This USB is for connecting computer.
17. U-disk connection port(USB)
You can save the file as a U-
disk File by press “SaveToUFile” on the software, then save it
to the u-disk and insert the u-disk to the port of laser machine, then use the control panel
to select and control it to work
18. Ethernet port
This Ethernet port is for connecting computer.
19. Laser power switch
The laser power will be on while you turn it on
20. Main switch
The laser machine will be start while you turn it on
21. Right side door
On Nova24, there are laser controller, driver(Hybrid Servo Drive and Micro Stepper
Drive ),TL-timer, and the main connecting cables etc.
On Nova35/51/63, there are laser controller, driver(Hybrid Servo Drive and Micro Stepper
Drive ), power supplier (both 24v DC and 36vDC),TL-timer, flap sensor checking board and
the main connecting cables etc.
Please open this door for checking these parts, but must pay attention to the electric current.
If you need to repair, please contact with professional maintenance staff.
22. Right-up side door
Maintenance for the Emergency stop button if required. This door is locked by using inside
screws and outside locks.
23. Indicate light
If laser machine is running a job or user starts it without closing door or water protection,
the signal lamp is in red light. The red light indicates the dangerous situation and user must
stay with the laser.
If laser machine is not at work, the signal lamp is in green light. The green light indicates
the safety situation and the laser machine is ready for operation.
If temperature is higher than 55°C/131°F on working table, the signal lamp will make
buzzing sound.(roughly 80dBA within 1m,75dBA within 5m and 65dBA within 10m,the
sound gets weaker as it travels).
24. Laser supply socket
To connect the main power and the extend power according the label information.