"Timer" Button.
- When the device is in operation and you want it to turn off automatically after a while,
press this button to activate the timer.
- When you press for the first time, the timer with half an hour "0.5h" will be activated.
- Each time you press the button it will add half an hour, up to 7.5 hours.
- After the selected time has elapsed, the device will turn off automatically.
- To deactivate the timer, press the button consecutively until the 4 indicators remain off.
(16 times from the first press).
Filling the water tank.
- Slowly open the water tank at the bottom rear of the device. Do not take out whole.
- Pour clean water without exceeding the "Max" signal.
- The water level must be below the "Max" signal and above the "Min" signal.
- It is only necessary to monitor that it has water in the functions of cooling and humidifying.
- To make the air a little cooler, insert an ice plate into the tank.
- Ice sheets must be previously frozen in a freezer.
Warnings.
- Note that when you put the ice plates in the tank, the water level rises.
- You must ensure that the water level does not exceed the "Max" signal.
- Never add ice to the deposit. Only the ice plates can be added.
Use of Ice Plates.
The function of the ice plates is to lower the water temperature of the tank.
In this way the device emits a fresher air.
Before using them in the device you have to prepare them beforehand.
Fill it with water to the "Max" mark. Put them in a freezer.
When they are well frozen, they will be ready for use in the appliance.
You just have to put it in the water tank of the appliance with water.
Note.
2 ice plates are included with the device so you can use them continuously.
Always have the 2 plates ready in a freezer.
You can then use one while the other is freezing in the freezer.
Warning.
Note that when you put the ice plate in the tank, the water level rises.
You must ensure that the water level does not exceed the "Max" signal.
