2
AUTO-CALIBRATION AND WHEEL CENTERING
CHECKING AND RESETTING THE RACING WHEEL'S CENTER VALUE
•
Checking the racing wheel's center value:
- On PC, access the Control Panel, then adjust the rotation angle to 1080°.
- Place your racing wheel's axis on the 50% marker, then check that your racing wheel is
physically perfectly centered.
•
Reconfiguring the racing wheel's center value
(If the racing wheel is slightly off-center in the Control Panel)
- If using a
PS3/PS4
, we recommend performing this procedure in the
PS3/PS4 system's menu
(not in a game).
- If using a
PC
, we recommend performing this procedure via the Windows® Desktop (not in a
game),
after exiting the Control Panel
.
1)
Connect the racing wheel's USB cable
(on PS3/PS4 or on PC), then wait for the auto-
calibration phase to end.
2)
Turn the
racing wheel fully to the left (until you reach the stop)
.
3)
Turn the
racing wheel fully to the right (until you reach the stop)
.
4)
Make sure that your racing wheel is
perfectly centered
; while holding it in this position, press
the
START (SE) + SELECT (ST) + MODE buttons simultaneously :
* T500
– GT WHEEL = « START (SE) + SELECT (ST) + MODE »
* TM OPEN WHEEL = « 5 + RIGHT PADDLE S MODE »
* 458 CHALLENGE GTE WHEEL = « RIGHT PADDLE S MODE »
* T300 - PS & GT WHEEL = « SHARE (SE) + OPTIONS (ST) + MODE »
* F1 WHEEL = « BO + WET + MODE »
* TM LEATHER 28 GT WHEEL = « RED or A RIGHT PADDLE S MODE »
* 599XX EVO 30 ALCANTARA® WHEEL = « RADIO + RIGHT PADDLE S MODE »
* 458 ITALIA WHEEL = « B + RIGHT PADDLE S MODE »
5)
The racing wheel's LED briefly changes colour, then reverts to its initial colour.
This means that
the wheel's center value has been reset and automatically saved to the device's
internal memory
(you do not need to repeat the procedure every time you connect the racing
wheel); this applies to all of the wheels (PS, GT, F1, 458 GTE, etc.).
YOU ARE NOW READY TO RACE!
