2
AUTO-CALIBRATION AND WHEEL CENTERING
CHECKING AND RESETTING THE RACING WHEEL'S CENTER VALUE
Checking the racing wheel's center value:
- On PC, access the Control Panel, then adjust the rotation angle to 1080°.
- Place your racing wheel's axis on the 50% marker, then check that your racing wheel is
physically perfectly centered.
Reconfiguring the racing wheel's center value
(If the racing wheel is slightly off-center in the Control Panel)
- If using a
PS3/PS4
, we recommend performing this procedure in the
PS3/PS4 system's menu
(not
in a game).
- If using a
PC
, we recommend performing this procedure via the Windows® Desktop (not in a game),
after exiting the Control Panel
.
1)
Connect the racing wheel's USB cable
(on PS3/PS4 or on PC), then wait for the auto-calibration
phase to end.
2)
Turn the
racing wheel fully to the left (until you reach the stop)
.
3)
Turn the
racing wheel fully to the right (until you reach the stop)
.
4)
Make sure that your racing wheel is
perfectly centered
; while holding it in this position,
press the
SE (Share), ST (Option)
&
MODE buttons simultaneously
:
5)
The racing wheel's LED briefly changes colour, then reverts to its initial colour.
This means that
the wheel's center value has been reset and automatically saved to the device's
internal memory
(you do not need to repeat the procedure every time you connect the racing wheel).
YOU ARE NOW READY TO RACE!
