___________________________________________________________________________
www.thriveagritech.com
800-205-7216
5
1)
Attach the Unistrut bars to the mounting surface as shown in Figure 2. The first two Unistrut bars of
a line of lights should be approximately
36” apart, and all subsequent Unistrut bars should be
about
47.25
” apart.
2)
Slide the cone nuts into the Unistrut bars and position them where the lights will be located (Figures
3 & 4). The center spacing of the light bars must match the lighting design provided by Thrive
Agritech to ensure proper light intensity and uniformity.
3)
Position the Slide & Lock clips on top of the cone nuts and secure in place using ¼-
20 x 1.5” machine
screws or hex bolts (Figure 5). Ensure all locking arms of the clips are facing the same direction.
36”
47.25
”
Unistrut
Figure 2
Figure 4
Cone Nuts
Light bar
Spacing
Figure 3
Figure 5
Slide & Lock Clip
Locking Arm
47.25”
47.25”
