three h Rescape, Инструкции

Страница: 3 / 4

STEP 1
STEP 2
STEP 3
Position the Hutch
Mount the Hutch
Install the Tiles
Insert the Threaded Rods into half of the
pre-drilled holes on the Rescape Tiles.
These Rods are to assist with positioning
the Hutch, they will be removed after
Step 2.
HOLD THE HUTCH IN PLACE
Align the holes in the hutch back with the
Threaded Rods.
Fasten the Hutch using the bolts provided,
tighten securely using the Allen Wrench.
Carefully hang the tiles on the rails.
Starting with the tile slightly above the rails,
slide it downwards to clip the brackets onto
the rail
(Figure A) .
Lift upwards slightly to slide left or right for
tile alignment.
Repeat Steps 1 to 3 for all tiles.