three h Rescape Lite, Инструкции

Страница: 3 / 4

STEP 1
STEP 2
STEP 3
Measure
Install the Rails
Install the Tiles
A.
Measure the total height of the tile
from the surface upwards and make
a mark.
B. From the top mark, measure down 3”
and snap a chalk line here.
C. From the bottom mark, measure up
3” and snap a chalk line.
Rescape Lite tiles include 3” inset
brackets that clip into the Rails.
Centered on the chalk line, begin fastening
the rail on the pre-marked stud locations.
Mount using FastCap Screws.
A min. of 4 Screws per rail is recommended.
Carefully hang the tiles on the rails.
Starting with the tile slightly above the rails,
slide it downwards to clip the brackets onto
the rail
(Figure A) .
Lift upwards slightly to slide left or right for
tile alignment.
Repeat Steps 1 to 3 for all tiles.
A
B
C
Figure A