Hubub
2
HUBUB
Lower the oval top plate down to the bottom of the large main post.
Loosely thread in 4 M6x16mm screws from the top plate to main post flange. Tighten screws equally with supplied allen wrench.
1
Allen Key
M6 x 16mm
Qty: 4
Страница 1: ...Hubub Tables General Installation ...
Страница 2: ...wer the oval top plate down to the bottom of the large main post Loosely thread in 4 M6x16mm screws from the top plate to main post flange Tighten screws equally with supplied allen wrench 1 2 Allen Key M6 x 16mm Qty 4 ...
Страница 3: ...w from the bottom of the plate Tighten screw with provided allen wrench 3 4 Allen Key M6 x 16mm Qty 1 Attach the base to the posts using 3 M6x25mm screws With the Base and Posts lying on their sides thread the screws into the proper holes Tighten each screw equally Allen Key M6 x 25mm Qty 3 ...
Страница 4: ...w be on the ground 5 6 Place the worksurface on a clean soft surface Ensure the Main Post is closer to the back of the worksurface Set post assembly in place and loosely thread in all 6 M6x16mm screws Fasten screws equally until all tight Allen Key M6 x 16mm Qty 6 ...