Thrane&Thrane TT-6006A, Руководство по установке

Страница: 14 / 48

Chapter 1: Installation
6 Installation
Flush mount
You can flush mount the Message Terminal in a console by using the 4 screw
holes (A) on the back of the terminal. The holes are M4 x 10 mm. For a
drawing of the Flush-mount plate with panel cut-out and mounting holes, see
Outline drawing: Flush mount plate on page 31.
Wall or desktop mounting
You can mount the Message Terminal on a horizontal surface or a vertical
surface using the optional mounting bracket. Do as follows:
1. Use the four holes in the mounting bracket to fasten the terminal to the
mounting surface. Screws are included with the mounting bracket.
2. Adjust the angle in steps of 7.5° by loosening the hand wheels slightly and
moving the Message Terminal into the wanted position. Remember to
tighten the hand wheels again.
Please refer to chapter B, Mechanical outlines , describing the detailed
mechanical outlines of the Message Terminal and mounting bracket.