Thrane&Thrane TT-3064A Скачать руководство пользователя страница 111

Страница: 111 / 152

Appendix F - List of Cause Codes

15Oct99

Page F-5

No MES response (11C8)

Call cleared by the NCS because no MES response was received
at the NCS during the call setup.

No terr. answer (13C2)

Call cleared by MES. MES time-out due to no answer (off-hook)
from called number within 185 seconds.

No SCPC carrier (12C6)

Call cleared by the LES because no SCPC carrier was detected
from the MES during the call setup.

Not installed (1180)

Incoming call cleared by the MES because the call was address
to a terminal (different from handset, aux phone, fax, data) not
available by the MES.

Premature call clear (1641)

Call cleared prematurely by the user (on-hook, hang-up) while
setting up the SCPC channel.

Repoint antenna (1363)

Call cleared by the MES because the user commands the
MES/antenna into another ocean region.

SCPC channel not avail. (1158)

Call cleared by the NCS because no SCPC channels are currently
available.

Service not available (1185)

Call cleared by LES. Service not provided at this LES.

Service not available (1195)

Call cleared by LES. Service temporarily not available at this LES.

SIM PID conflict (16D1)

Call cleared by the LES because the SIM card has a different
identify than expected (replace of SIM card with another without
LES knowing ?).

SIM PID invalid (15A5)

Call cleared by the LES because the SIM card is not authorised
for any service at this LES.

SIM service invalid (16A5)

Call cleared by the LES because the SIM card is not authorised
for the requested service at this LES.

Содержание TT-3064A
























































































































































Результаты поиска

Содержание TT-3064A

Отзывы:

Похожие инструкции для TT-3064A

Бренды по названию

Популярные бренды

Thrane&Thrane TT-3064A, Руководство пользователя

Результаты поиска

Содержание TT-3064A

Отзывы:

Похожие инструкции для TT-3064A

Бренды по названию

Популярные бренды