T
Thrane & Thrane
T
TT-3020B C p a ra
Capsat Transceiver
I
t l
o
l
Installation Manual
P g
Page 6
16
5
30MAY95
2.5
TT-3020B Capsat Transceiver
Figure 4: TT-3020B Capsat Transceiver
2.5.1
Mounting bracket
The TT-3020B Capsat Transceiver is supplied with an universal mounting bracket (41-
100562) which allows "over" or "under" mounting to e.g. a table or ceiling.
It is recommended that the Transceiver is mounted in an open air location allowing the
operator full access to the front panel in a distress situation.
When the Transceiver is used with other Thrane & Thrane equipment such as the
TT-3606A Message Terminal or the TT-3210A Radiotelex Modem, stacked mounting may
be achieved using mounting bracket 41-100742.
It is strongly recommended not to stack mount the TT-3020B Capsat Transceiver with
the TT-3680A Power Supply because of the heat generation from this unit.
2.5.2
Communication port
The TT-3020B Capsat Transceiver communicates with a controller device via the
standard EIA RS-232D ports, located on the rear panel at X4.
2.5.2.1
Baudrate and protocol settings
The TT-3020B accepts the following:
http://funk-an-bord.de
-- Page 19 of 42 --
Materialien zur LRC Prüfung
