Thrane&Thrane SAILOR 6101, Инструкция по установке и эксплуатации, Страница: 31 / 43

Chapter 2: Connecting cables
24 Connectors
DC Power input
Overview
The DC Power input connects to a DC supply with 24 V DC nominal (10.8 to
32 V DC). The interface also has a “remote on/off” function.
The Power connector is a custom connector; a matching cable with connector
is included in the delivery.
Pin-out
The figure and table below show the connector outline on the Alarm Panel,
pin assignments and wire color in the power cable delivered with the
Alarm Panel.
Remote on/off (ON_IN)
With the Remote on/off function you can switch the Alarm Panel on and off
from a remote location, using a switch. Note that the Alarm Panel does not
have a power button, so it is always on, unless you use the remote on/off
function.
Important
If you are
not
going to use the remote on/off function, you must
connect pin 3 (ON_IN) to pin 2 (DC-) permanently.
Pin
number
Pin function
Wire color in
power cable
1 DC+ (10.8 - 32 V DC) Red
2 DC- (0 V DC) Black
3 ON_IN
(see below) White
4 Not connected Blue
Front view on Alarm Panel
Panel lock, 4 pin male