Thrane&Thrane SAILOR 5131A, Техническое руководство, Страница: 17 / 36

2 Installation Console 5000
2-11
2.7 Factory configuration of the console
When the System 5000 Console is ordered along with the relevant equipment sets and Service Pack part
number (Service Pack denotes factory installation of units in console) the configuration of the equipment
will be as per the following notation:
In consoles with two handsets and hence two radio control units, the left side handset is always associated
with the upper most control unit (MF/HF CU).
Supplied with the Console accessory kit are self adhesive labels which may be used to mark the
respective handsets for MF/HF and VHF, for ease of identification (Fig. 1).
BATTERY
ALARM
V
1
GENCY
EMER-
LIGHT
BATTERY 1
BATTERY 2
2
A
2 AC 1
ALARM
MUTE/
1 - 2
BATT
DIM
TEST
99-128 5 17
M F/HF
VHF
MF/HF 2
Fig.1
Equipment configuration:
With two TT-3000EB mini-C installed (Fig. 2) the printer and Message Terminal/keyboard associated with
#1 mini-C (part of primary GMDSS equipment) is installed in the left hand side of the console and the
associated mini-C Alarm Panel being the left hand one. The #2 mini-C equipment (part of duplication
GMDSS equipment) is installed in the right hand side, the mini-C Alarm Panel being the right hand one.
Both Message Terminals will be configured with the Capsat application software program.
The MF/HF controller is installed as the upper most unit (as part of System #1 or primary GMDSS
equipment) and the #1 VHF installed below the MF/HF Control Unit also as part of the #1 System or
primary GMDSS equipment.
BATTERY
ALARM
V
1
GENCY
EMER-
LIGHT
BATTERY 1
BATTERY 2
2
A
2 AC 1
ALARM
MUTE/
1 - 2
BATT
DIM
TEST
99-128 5 12
# 1 mini - C
# 1 printer
# 1 keyboard
# 2 mini - C
# 2 printer
# 2 keyboard
Fig.2
0815