Accredited Solution EXPLORER 700 – P3-62W Foldable Solar Panel
Page 3/4
Tested on products:
EXPLORER 700
2.04
Instructions:
How to connect the P3-62W solar panel to EXPLORER 700 terminal:
1. Unfold the P3-62W solar panel and point it towards the sun for optimal charging
2. Plug one end of the 8 foot extension chord to the EXPLORER terminal DC input
3. Connect the SAE plug to the P3-62W solar panel
4. The EXPLORER terminal will automatically be powered on and start charging once it is
connected to the solar panel.
Folding instructions for the P3-62W solar panel:
Step 1:
Fold one side of the panel down the hinge-
fold, active solar cells to the inside.
Figure 1.
Step 2:
Starting at the end away from the cable, fold
the panel along its hinge-folds.
Figure 3.
Step 3:
Then wrap the flap around until both the hook
and loop sides of the Velcro are lined up.
Figure 4.
Step 4:
Lastly, press the Velcro together to secure the
fold unit.
Figure 5.
It is recommended to set the Power Up Mode in the EXPLORER 700 to Manual, so it does not power
up automatically each time the solar panel is connected. Please refer to next page.