manualshive.com logo in svg

Thorsis Technologies isNet DiagM PA, Руководство пользователя

Поделиться
Скачать
Thorsis Technologies isNet DiagM PA Скачать руководство пользователя страница 23

23

1.6 

isNet H@rt+AI

The isNet H@rt8+AI module combines the HART master module with 

4..20mA Analog Input functionality. The module provides 8 active AI 

channels, which means the module will supply 24V DC to the HART 
loops and thus power the connected HART instruments. The HART 
instruments can be connected directly to the module, an external 
loop resistor is not required as the input impedance of the AI chan-
nels already is 240 Ohms.

The measured analog values can be read by a connected PLC using 

Modbus/TCP or Profinet. Due to the HART master functionality the 
PLC has also access to the digital values of the HART instruments. 

Additionally an engineering station can simultaneously access the 

HART parameters of the connected HART instruments for configu-
ration, diagnosis or maintenance. This is possible with FDT based ap-
plications like PACTware, with OPC or with any other HART-IP client 
applications.

Содержание isNet DiagM PA





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды