KATflow 150
6 Maintenance
6
Maintenance
KATflow flowmeters are maintenance free concerning the flow measurement func-
tions. Within the scope of periodic inspections, regular inspection for signs of dam -
age or corrosion is recommended for the transducers, the junction box if installed,
and the flowmeter housing.
6.1
Service/Repair
KATflow flowmeters have been carefully manufactured and tested. If installed and
operated in accordance with the operating instructions, no problems are usually ex-
perienced.
Should you nevertheless need to return a device for inspection or repair, please pay
attention to the following points:
Due to statutory regulations on environmental protection and safeguarding the
health and safety of our personnel, the manufacturer may only handle, test and
repair returned devices that have been in contact with products without risk to
personnel and environment.
This means that the manufacturer can only service this device if it is accompan-
ied by a Customer Return Note (CRN) confirming that the device is safe to
handle.
If the device has been operated with toxic, caustic, flammable or water-endanger-
ing products, you are kindly requested:
to check and ensure, if necessary by rinsing or neutralising, that all cavities are
free from such dangerous substances,
to enclose a certificate with the device confirming that is safe to handle and stat -
ing the product used.
39
!
!
