Switch
the
TV
on
/
standby
Please make sure the power cord is connected.
-Press POWER button on the remote control or on
the right rear of the TV to switch the TV on.
The power indicator changes from red to green.
-Press POWER button again to switch the TV to
standby mode.
The power indicator will change from green to red and
the appliance will switch off.
Selection
of
Input
Mode
-Press the Input button to display the Input source
menu (as shown right).
-Press or or INPUT button to select the signal source you
desire, then press the ENTER button to confirm.
OSD
Option
Adjustment
After you have installed the batteries into the remote
control, you may want to set some preferences on the
LCD using the menu system.
-The buttons for OSD option adjustment include:
Menu, , , , ENTER and Exit buttons.
-Press the Menu button to display the OSD Setup
Menu then press or button to select the pages.
The pages are displayed in the following sequence
(circular display):
CHANNEL PICTURE SOUND TIME LOCK SETUP
Note: CHANNEL menu page is displayed only for TV
mode.
1. Press the Menu button to display the OSD setup
menu.
2. Press the or button to select the menu pages.
3. Press the Enter or button to enter.
4. Press the or button to select an item.
5. Press , , , button to select or adjust a setting.
6. If you do not make a selection within several seconds,
the main menu closes automatically.
7. Press the Menu or Exit button to return or exit OSD setup
menu.
Basic Operation
SMART TV
Содержание LT42THL3DS1
Страница 54: ...2025821SS...