THORLABS TST001, Руководство пользователя

Страница: 18 / 72

18 HA0141T Rev 7 Oct 2014
Chapter 3
3) From the 'APT Configuration Utility' window, click the 'Stage' tab.
Fig. 3.4 APT Configuration Utility - Stage Tab
4) In the ‘Motor’ field, select the serial number of the stepper motor controller to be
configured (this number can be found on the side of the unit).
5) In the ‘Stage’ field, select your actuator type (e.g. ZST12(B)) from the list
displayed.
6) Click the 'Add/Change Stage Association' button. The actuator type and serial
number are added to the list in the main window as shown above.
7) The server reads in the stage and controller information on start up.
Shut down the APTConfig utility and proceed to Section 3.6. to verify the software
operation.
See the APT Config utility on line help for further information.