THORLABS SLS303, Руководство пользователя

Страница: 11 / 23

Stabilized Benchtop IR Light Source Chapter 4: Getting Started
Rev B, August 4, 2021
Page 9
Use a 10 mm wrench (not included) to rotate the washer underneath the bottom plate. Press slightly on the plastic
foot to make sure it does not rotate together with the washer. A counter clockwise rotation will increase the height.
All feet are set to minimum height by default.
Figure 4.6 Adjusting the Height of the Support Feet
The lamp housing also allows direct mounting to an optical breadboard or table. It is compatible with both metric
and imperial breadboards/tables. Simply remove all four feet with a 4 mm hex key and use 6 mm or 1/4"-20 cap
screws (not included) to secure the bottom plate to a working surface.
Figure 4.7 Lamp Housing Mounted on a Breadboard
Connect the lamp cable to both the lamp house and controller. Please notice that there is an arrow marker on both
the plug and the socket. Make sure those the markers are in line with each other, then press the thread cap onto
the socket, turning it clockwise to lock the connector. To remove the cable, press the threaded cap slightly and turn
it counter-clockwise to unlock the connector.