5
2.3 Installation
1) Position the supports in approximately the correct position for the table – see Fig. 2.2 for dimensions.
Fig. 2.2 Support positions
2.3.1 Mounting the Table on the Supports
1) Raise the table on a fork-lift truck, ensuring that the fork distance is set such that the forks can pass between the
supports when the table is lowered into position – See Fig. 2.3.
Fig. 2.3 Distance between forks
2) Manoeuvre the fork-lift truck until the table is over the supports. Carefully lower the table until it is around 20mm above
the supports.
3) Lower the table onto the supports.
4) When the table is resting on the supports, remove the fork-lift truck.
Note
During item 1, two people, one on each side, should be employed in positioning the supports.
0.55 x L
W - 280mm
L
W
5.0 mm
forks
distance between isolators
