THORLABS PM102, Руководство по эксплуатации

Страница: 22 / 30

© 2019 Thorlabs 17
PM102x
4 Appendix
4.1 Technical Data
All technical data are valid at 23 ± 5°C and 45 ± 15% rel. humidity (non condensing)
PM102
PM102A PM102U
Interfaces
Input/Output Interface Mini USB, DA-15 Mini USB, Analog SMA Mini USB
Operation Protocol
USB, RS232, UART
Autonomous Operation
USB, Analog,
Autonomous Operation
USB
Voltage Input
(Thermopile Sensors)
Connector DE-9 (left housing side)
Units W, dBm, W/cm², V
Measurement Range
1)
9 Ranges; 2, 4, 10, 20, 40, 100, 200, 400, 1000 mV
Ranges Selectable in W, Sensor Dependent
Display Resolution 1 µV / Responsivity Value (V/W)
Measurement Uncertainty
±0.5% Full Scale (10 mV - 1 V)
±1% Full Scale (2 mV, 4 mV)
Analog Bandwidth DC - 10 Hz, Dependent on Sensor and Settings
Time Constant Correction
Range
1 s - 30 s
Wavelength Correction Sensor Dependent; nm, (V/W)
Beam Area Setting Diameter 1/e² or Rectangular x,y
Sensor Temperature Control
Supported Temperature
Sensor
Thermistor
Temperature Measurement
Range
-10 ° C to 120 ° C
Sensor Power Supply
Connector DE-9 Pin 1
Voltage
5V
Maximum Current
100 mA
Remote Interfaces
Remote Interface Type 1 USB 2.0
Connector Mini-B USB
Measurement Speed Up to 500/s
Remote Interface Type 2 RS232
Connector DA-15 Pin 7/8 NA NA
Baud Rate
9600 - 230400 Bit/s
Default: 115200 Bit/s
NA NA
Settings N1S NA NA
Measurement Speed Up to 200/s NA NA
Analog Output, Configurable
Number of Analog Outputs 3 3 NA
Connector DA-15 Pin 4, 5, 6 SMA NA
Signal
Power (configurable in V/W),
X-Position & Y-Position
(configurable in V/µm)
Power (configurable in V/W),
X-Position & Y-Position
(configurable in V/µm)
NA