Optical Trap Kit
19590-D04-V15; Apr 12, 2012
Page 3
www.thorlabs.com
Part 1.
Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply
when the unit is operated correctly.
WARNING
This unit must not be operated in explosive environments
WARNING
Make sure the fuse setting at the back of the laser diode driver and temperature controller
are appropriate for your region. Failure to do this will result in damage to the controllers.
Set TEC and max LD current parameters according to the specifications of the trapping
laser diode before operating the Optical Trapping Kit. Failure to do so may result in damage
of trapping laser diode. Also refer to the manual for the white light source current driver.
Failure to do this may result in damage to the LED.
WARNING
Latex gloves should be worn to prevent oil from fingers from reaching all optical surfaces.
Make sure you use appropriate laser safety glasses during operation.
WARNING
Avoid Exposure – ASE and laser radiation emitted from apertures.
Never look directly in to beam.
