THORLABS OCT-LK Series, Руководство пользователя

Страница: 14 / 42

OCTP Series Scanner Chapter 3: Components and Compatibility
Rev F, November 03, 2018 Page 9
3.1.6. Lens Kits
For the case that an OCT scan lens kit is installed, the mechanical dimensions are summarized in the table
below.
Figure 8 Objective Holder Shown with Scan Lens Kit Installed
OCT Scan Lens Kit OCT-LK2(-BB) OCT-LK3(-BB) OCT-LK4(-BB)
Field of View
6 mm x 6 mm 10 mm x 10 mm 16 mm x 16 mm
Barrel Height (B)
29.5 mm 28.0 mm 41.0 mm
Working Distance (WD)
3.4 mm 24.9 mm 41.6 mm
Table 1 Dimensions for OCT-LKx Scan Lens Kits
Changing the objective of the OCTP requires changing the probe configuration data in the software package
ThorImage ® OCT. The length of the reference arm must be aligned to match the optical path in the sample arm
as well.
This is performed automatically using the built-in calibration procedure of the ThorImage ® OCT software package
version 4.1.4 and higher. A detailed description of this procedure is given in the ThorImage
®
OCT operating
manual.
3.1.7. OCT-STAND
The OCT-STAND is a dedicated stand for OCTP scanners. The OCTP scanners are attached to the focus block
of the OCT-STAND using a spring-loaded mount accepting the dovetail mount of the OCTP. The focus block
can be rotated 360° around the Ø1.5” rod, and features 30 mm of travel with fine and coarse adjustment knobs.
Figure 9 OCTP in Thorlabs OCT-STAND