THORLABS MX10B Series, Руководство пользователя

Страница: 14 / 44

MX10B, MX40B Series of Optical Transmitters Chapter 3: Quick Start Guide
Page 10 TTN048897-D02
3.4 Controls on the Settings Pages
The Settings pages all follow the same general design and functionality as shown in the example screen shot below. The upper
section with white letters displays the parameters that can be changed. Simply tap on the parameter of interest to highlight it,
and the controls for that parameter will be presented.
The lower section with amber letters displays selected values that are convenient to monitor on that page.
The right-hand column provides the controls for changing the values for the selected parameters. The main control knob on the
front panel can also be used to adjust and confirm selected values. The screen shots below show examples of the touch-screen
controls.
Figure 14 Controls used to Adjust and Save Values of Selected Parameters
Fields that have adjustable values will show a flag if the minimum or maximum values have been reached. These are set by
firmware at the factory.
Figure 15 MIN and MAX Flags Indicate Bounds of Adjustable Value Ranges
Tap to select parameter.
Yellow highlight will appear.
Increase value
Decrease value
Change step size
Confirm new value
Cancel any changes
Monitor area
MIN / MAX warnings
indicate that the setting
limit for a particular
parameter has been
reached.