Nikon TE2000 Filter Cube Assembly Manual
21399-D02 Rev A, August 27, 2010
Page 3
www.thorlabs.com
Part 1. Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply
when the unit is assembled and operated correctly. Handle all optics with care. Gloves are recommended
for optic installations. Take care when tightening optics, as overtightening optics may cause the optic to
break or shatter.
Part 2. Assembly Instructions
Step 1
Carefully unpack the Nikon MDFM-TE2000
Filter Cube assembly. Take note where
the emitter and exciter sides of the cube
are (see Figure 1).
Figure 1. MDFM-TE2000 Filter Cube
Step 2.
Unscrew the exciter retaining ring, noting that the mounting sleeve is inside the exciter retaining ring.
The mounting sleeve fits into the indents in the exciter retaining ring and should be oriented with the flat
side against the lip of the retaining ring as shown in Figure 2.
Figure 2. Exciter Retaining Ring and Mounting Sleeve
Exciter Side
Emitter Side
Exciter
Retainer Ring
Exciter Retainer
Sleeve
