4.1 Troubleshooting
4 Service and Maintenance
4.1 Troubleshooting
Card does not work at all :
Look if the Card is inserted properly into the TXP mainframe and the ejector
handle has snapped into its position.
Look if the mainframe is powered up (does any LED light up)
You don’t get the desired laser output power
Is the global interlock closed (TXP5016 only)?
If you do not use the global interlock, put the short circuit plug delivered with the
TXP5016 on the D-SUB connector at the rear panel of the TXP.
If you don’t find the error source by means of the trouble shooting list, please
contact
the
Thorlabs Hotline ([email protected])
4.2 Recalibration
In normal operation the LS5000 card does not need any service. If highest precision
of the measurements is vital for you, you should send your module for recalibration to
Thorlabs GmbH
(Germany)
every two years. You can see the due date of calibration
in the card info-menu of the card driver (refer to 3.2.3, “The cards menu”).
LS5000 / page
23
